SUBFLOOR

SUBFLOOR
  • ANT CAPPING - CONFORMS TO AS3660
    Ant caps are a form of physical barrier to termites and are inserted between the lower floor framing timber and the supporting stumps, piers or masonry bases. They are usually made from galvanised sheet metal and are designed to force termites out into the open for detection during physical inspection. Any sign of future termite activity is evidenced by mud tunnels or galleries which the foraging termites bridge over the shields. Conforms to AS3660. Ant Capping has a 56mm turn down.
    Image Code Description Pack Qty MSDS / Brochure
    ANT17024 Ant Capping Half 170mm x 2400mm 10
    ANT22624 Ant Capping Full 226mm x 2400mm 10
    ANT28624 Ant Capping Half 286mm x 2400mm 10
    ANT33624 Ant Capping Half 336mm x 2400mm 10
    ANT34224 Ant Capping Full 342mm x 2400mm 10
    ANT39224 Ant Capping Full 392mm x 2400mm 10
  • NO MORE SOLDER - TERMITE PROOF SILICONE
    NOVITHOR Termite Proof Flexi-Gel is a high performance neutral cure silicone sealant and adhesive, specifically formulated for termite proofing buildings during construction. It is suitable for use indoors,outdoors or in confined spaces. It is used for termite proofing construction joints and saw cuts in slabs; termite proofing control joints in brickwork or block work; termite proofing tilt slab panels and securing tilt panels; filling construction and expansion joints or crevices in the slab and in Australia for joining ant-capping. Termites are unable to penetrate the NOVITHOR Termite Proof Flexi-Gel that has been fully tested in rigorous trials with the CSIRO
    Image Code Description Pack Qty MSDS / Brochure
    NOSOLDER No More Solder 300gm Cartridge 20
  • PIER CAPS - 0.5MM GALVANISED
    Ant caps are a form of physical barrier to termites and are inserted between the lower floor framing timber and the supporting stumps, piers or masonry bases. They are usually made from galvanised sheet metal and are designed to force termites out into the open for detection during physical inspection. Any sign of future termite activity is evidenced by mud tunnels or galleries which the foraging termites bridge over the shields. Conforms to AS3660. Ant Capping has a 56mm turn down.
    Image Code Description Pack Qty MSDS / Brochure
    PCFUL Full Pier Caps 230mm x 230mm 20
    PCHAF Half Pier Caps 230mm x 115mm 20
  • RESIN CORE SOLDER
    Cored wires are used in the Automotive, Electrical, Electronic, General Engineering, radiation Industries.
    Image Code Description Pack Qty MSDS / Brochure
    SOLD23250 50/50 Resin Core Solder 2.3mm x 250gm 12
    SOLD23500 50/50 Resin Core Solder 2.3mm x 500gm 6
    SOLD32250 50/50 Resin Core Solder 3.2mm x 250gm 12
    SOLD32500 50/50 Resin Core Solder 3.2mm x 500gm 6
    SOLDSTK Stick Solder 50/50 250gms 10
  • SUBFLOOR VENTS
    This vent is designed for areas prone to bush fires with a brass wire mesh inserted into the rear of the vent Subfloor vents are designed when installed to improve sub-floor ventilation thus helping to reduce fungi/ mould, timber Decay, reduce the risk of termite infestation and the cupping of timber floors. 230 x160 double brick
    Image Code Description Pack Qty MSDS / Brochure
    SUBAS160 SubFloor Vents Std Antispark 230 x 160mm 20
    SUBAS76 Sub Floor Vents Std Antispark 230 x 76mm 20
    SUBL160 Sub Floor Vents Louvre 230mm x 160mm 20
    SUBLF Louvre Faced Only Vent 230 X 160mm 20
    SUBV160 Sub Floor Vents Standard 230mm x 160mm 20
    SUBV76 Sub Floor Vents Standard 230mm x 76mm 20
    SUBVENT Sub Floor Vents 230 x 76mm Slim 20