MASONARY TIES

MASONARY TIES
  • FRAME TIES

    Galvanised Frame Tie For tying block to the face of a support frame for structural reinforcement.
    Length: 230mm
    Material: Z275
    Thickness: 0.75mm
    Rating: R1

    Image Code Description Pack Qty MSDS / Brochure
    FT Frame Ties 240mm Box/150 20
    FTSS Frame Ties 230mm Box/150 Stainless Steel 20
  • MASONRY EXPANSION TIES
    3-1* Galvanised Compression Tie Galvanised compression tie for bedjoint bridging of vertical expansion joints. Resists lateral movement, compression action copes with brick or block wall movement.
    Image Code Description Pack Qty MSDS / Brochure
    MET31 Masonry Expansion Tie 3-1 Pk.50 50
    MET33 Masonry Expansion Tie 3-3 Pk.50 50
    MET43 Masonry Expansion Tie 4-3 Pk.50 50
    MET51 Masonry Expansion Tie 5-1 Pk.50 50
    MET53 Masonry Expansion Tie 5-3 Pk.50 50
  • NI-TIES
    Medium Duty Cavity 50mm Cavity Ties in Medium duty (white) to satisfy AS/NZ 2699-2000. Rounded ends to prevent injury and central hole to assist bond in mortar.
    Image Code Description Pack Qty MSDS / Brochure
    NIECW Nities Cavity Tie White 50mm Pack/100 5
    NIECW100 Nities Cavity Tie Red 100mm Pack/100 5
    NITIEA Acoustic Ni Ties Pack/100 5
    NITIES Nities Stubby Ties Pack/100 9
    NITIEV Ni Ties Veneer Pack/100 5
  • PLASTIC EXPANSION TIES
    3-3* Plastic Expansion Sliding Tie: to allow for brick movement in bridging of vertical brick joints. Available with galvanised or stainless steel pin. 5-3* Plastic Expansion Sliding Tie: 90° for fixing brick walls to columns PLASTIC EXPANSION TIES Pk Qty Min Qty
    Image Code Description Pack Qty MSDS / Brochure
    PEXP33 Plastic Expansion Ties 33 Gal. Pin Box50 5
    PEXP53 Plastic Expansion Ties 53 Gal. Pin Box50 5
    PEXPSS33 Plastic Expansion Ties 33 S/S. Pin Box25 5
  • STUBBY TIES
    Category: Face Fixed Brick Tie Classification: Light Duty Maximum Cavity: 50mm Corrosion Resistance: Standard Fastening Requirements: 30mm x 2.8mm Processed Nail. • Complies With Z600 AS2699.1
    Image Code Description Pack Qty MSDS / Brochure
    STUBT Stubby Ties 115mm Box/150 20
    STUBTDD Stubby Ties Doubled Dipped Box/150 20
    STUBTSS Stubby Ties S/Steel Box/150 20
  • VENEER TIES

    Category: Masonry Veneer Tie
    Classification: Light Duty
    Maximum Cavity: 50mm
    Corrosion Resistance: Standard
    Fastening Requirements: 50mm into mortar to bend line with rib up.
    Plain end to be side fixed to stud with one
    30mm x 3.15mm Processed Nail.
    Complies With AS2699-1984

    Image Code Description Pack Qty MSDS / Brochure
    VENT Veneer Ties Box/150 20
    VENTDD Veneer Ties Double Dipped Box/150 20
    VENTSS Veneer Ties Stainless Steel Box/150 20
  • WALL EXPANSION TIES

    Abey"s Stainless steel Brickies Own Wall Expansion Ties does all the hard work in laying masonry wall expansion gaps.
    The patented design holds tight providing maximum grip in the hard yet brittle mortar, whilst maintaining the correct control gap (10-20mm)required in masonry construction.
    Manufactured to conform to a corrosion resistance for R4 for use in coastal or industrial areas as required in AS2699 & AS3700 standards.

    Image Code Description Pack Qty MSDS / Brochure
    A0316 Expansion Tie Stainless Steel 20/Box 10
    A0600 Expansion Tie Galvanised 20/Box 10
  • WALLTIES - STAINLESS STEEL

    All red galvanised wall ties are manufactured using Australian made ONESTEEL
    galvanised red walltie wire which has a guaranteed coating of 470g/m².
    This ensures peace of mind when using our wall ties in any brick cavity or brick
    veneer construction.
    Test certificates are available on all of our walltie products, and all packaging
    Wallties also fully complies with Australian Standard AS2699.1.2000.
    R3 Rated.
    Maximum Cavity Width 70mm
    3mm Thick
    Box of 500

    Image Code Description Pack Qty MSDS / Brochure
    WT175MESS Wallties S/S 175mm Medium Duty Box/500 5
  • WALLTIES - WIRE TYPE COMPLIES WITH AS/NZS 2699:2000
    Used in the construction of double brick and brick veneer walls Made to the Australian Standard 175mm - Suits max. cavity width 60mm 230mm - Suits max. cavity width 120mm RED (EXTRA HEAVY HOT DIP GALVANISED) Made from 470g/m2 heavily galvanised wire to comply with AS/NZS2699–2000 Durability classification R3 down to R0 rating according to AS/NZS2699.1:2000
    Image Code Description Pack Qty MSDS / Brochure
    WT175ME Wallties 175mm Medium Duty Box/500 10
    WT225ME Wallties 225mm Medium Duty Box/500 10